Now 30% Lighter Than its Predecessor. More Powerful Than the Competition. Quieter Operation.

The Reliant™ RS85-L provides a whopping 85 CFM of air power at almost half the weight of its predecessor. Enough power, in fact, to operate a 90 lb. jack hammer or 4” piercing tool or 1-1/2 inch impact wrench or assist in air gouging. No other brand of hydraulic driven abovedeck systems can even come close. The RS85-L is designed with an aluminum air end and canopy to reduce weight and to protect against rust. Its compact footprint increases deck space on your truck, and its sound attenuation design decreases noise levels for comfortable operation.

Get a Quote
Reliant™ RS85-L
Capacity (CFM)Air Pressure (PSI)Compressor RPMHydraulic Flow (GPM)Hydraulic Pressure (PSI)
60100195014.02500
60150197514.22750
70100227516.52650
70150230016.82800
80100265018.52800
80150265018.83075
85100285019.72800
85125285019.92950

Compressor Dimensions with fittings (In.) – 38.55L X 21.0W X 24.64H

Dimensions listed are not a complete representation of total space necessary. Please consult Vanair for overall space and air requirements.

Dry Weight (Lbs.) – 285

*Ratings are approximate and are based on 120 ˚F hydraulic fluid temperature. Add 400 PSI minimum to hydraulic requirements for hydraulic system continuous pressure ratings. Consult Vanair® for specific details. **85 CFM @ 150 PSI systems may require additional cooling.

PERFORMANCE

  • 60-85 CFM and up to 150 PSI
  • Ambient Operating Range of -20°F to +125°F
  • Lightweight
  • Six-Pin Weatherproof Electrical Connection
  • Hydraulic Cooling Assist for Additional Hydraulic Systems
  • 12V DC Model Available
  • Open Center or Closed Center Hydraulic Manifold Block

ENCAPSULATED AIR COMPRESSOR

  • Direct-Driven Aluminum Encapsulated Rotary Screw Air End
  • Bolt-On Inlet Valve
  • Integral Air-to-Oil Separator Tank
  • Lifetime Warranty on Air End
  • Made in the USA

AIR-TO-OIL COOLER

  • Capable of Cooling Up to 150 PSI
  • Ambient Operating Range of -20 ˚F to + 125 ˚F

HYDRAULIC COOLER

  • Integrated Cooler Reduces Heat in Truck Hydraulic System

HYDRAULICS

  • Gear-Type Motor
  • Hydraulic Oil In – 3/4” 37 Degree JIC (#12)
  • Hydraulic Oil Out – 1” 37 Degree JIC (#16)
  • Open Center or Closed Center
  • Hydraulic Case Drain – 3/8” 37 Degree JIC (#6)
  • Hydraulic Load Sense Line – 1/4” 37 Degree JIC (#4)*

INSTRUMENTATION STANDARD

  • Conveniently Located and Easy to Read Temperature, Hour, and Pressure Gauges
  • Relocatable

SAFETY EQUIPMENT

  • Air Pressure Relief Safety Valve
  • Open Center Hydraulic Oil Pressure Relief Valve
  • Automatic Blow-Down on Shutdown
  • High-Temperature and High-Pressure Shutdown
  • Vented Fill Cap

SERVICEABILITY/CONVENIENCE

  • Reversible Hinged Hood
  • Access Panel for Easy Accessibility for Oil Changes
  • JIC Fittings on Front of Machine for Hydraulic and Air Connections for Convenience

CANOPY

  • Lightweight Powder-Coated Aluminum Sheet Metal Enclosure
  • Single Point Lifting Bail

COLD WEATHER PACKAGE (OPTIONAL)

  • Integrated System with Hydraulic Thermal Valve
  • 20 – 60 Gallon Air Reservoirs
  • Aftercoolers
  • Air Hoses
  • Air Tools
  • Hose Reels and Fittings
  • OSHA Excess Flow Safety Valve
  • Service/Control Line Moisture Separators
  • Tool Oiler/Lubricator
  • Service Airline De-Icer
  • Filter Regulator Lubricator (FRL) 1/2”
  • 24 VDC to 12VDC Converter; IP68 Rated (Required When Installing on a 24VDC Chassis)

All hydraulic ratings and pressures are at the machine and do not take into account the pressure drops of individual hydraulic systems. These pressure drops need to be taken into account and added to the rating of the hydraulic pump and components. Vanair highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following: The hydraulic flow and pressure requirements of the air compressor, the continuous hydraulic load when the compressor is running, the duty cycle and ambient operating temperatures, and any other hydraulic equipment that may share the same hydraulic supply system (Vanair recommends a dedicated pump and hydraulic circuit).

For more information please consult Vanair.

Part DescriptionPart Number
Service Kit, Initial 50 Hours for RS85 (Includes Oil, Oil Filter)KIT1212
Service Kit, Lifetime Warranty for RS85 (Includes Oil, Oil Filter, Air Filter)KIT1221
Vanguard™ Premium Green Oil (Four Pack)264626-4GREEN
Vanguard™ Premium Oil (Four Gal.)264626-4PACK
Vanair - Mobile Power Solutions