True 40 CFM ... Built-In Hydraulic Cooler
The RC 40 features an intregrated hydraulic cooler for the most efficient cooling capabilities. The use of concentric valves rather than traditional valves provides longer life and better performance as well as reduces maintenance costs. The RC 40 is the perfect choice for mechanics and service trucks.
Compressor Dimensions with fittings(in.)– 37.0 L x 21.0 W x 22.0 H*
Dry Weight(lbs.) – 408
| Specifications |
|---|
| CFM Rating @ 100 PSI |
30 | 40 |
| Air Pressure, PSI |
100 |
125 |
150 |
175 |
100 |
125 |
150 |
175 |
| Hydraulic Flow, GPM |
11.3 |
11.3 |
11.3 |
11.3 |
14.3 |
14.3 |
14.3 |
14.3 |
| Hydraulic Pressure, PSIG |
1520 |
1630 |
1750 |
1815 |
1700 |
1850 |
1950 |
2000 |
Ratings based on 120° F hydraulic fluid temperatures. Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligations.
SPECIAL FEATURES
Compressor
- Reciprocating type
- Integral hydraulic oil cooler
- Available with open or closed
hydraulic manifold block
- V-Belts driven by hydraulic motor
- Added features:
- Powder-coated, galvanneal
sheetmetal enclosure
- Designed with (3) v-belts for
maximum productivity
- Rugged, cast-iron crankcase
- Corrosion-resistant steel valves
- Tapered roller-type main bearings
- Balanced crankshaft
- Weight-matched balanced
pistons
- High-flow valves
- Lightweight connecting rods
- Supply connections:
- Hydraulic oil in – 3/4” 37° JIC
- Hydraulic oil out – 1” 37° JIC
- Case drain – 1/4” 37° JIC
- Electrical 12-Volt DC and 24-Volt DC
- Vibration isolation for air
compressor and drive system
for quiet operation
Compressor Control System
- Integral on-off manifold with solenoid diverter valve and hydraulic pressure relief valves
Safety Equipment
- Air pressure-relief safety valve
- Hydraulic oil pressure-relief valve
Options/Accessories
- Filter/lubricator/regulator (FLR)
- Air hoses, hose reels, and fittings
- 20, 30, or 60 gallon air reservoirs
HYDRAULIC SYSTEM RECOMMENDATIONS
Vanair highly recommends consulting a hydraulic supply expert for specifying the correct hydraulic pump size and type, oil reservoir size, hydraulic cooler, hydraulic pressure relief, and other hydraulic supply components for your application. Please take into consideration the following:
- The hydraulic flow and pressure requirements of the air compressor
- Keep in mind that when the compressor is running there is a continuous hydraulic load
- The duty cycle and ambient operating temperatures
- Other hydraulic equipment which may share the same hydraulic supply system (Vanair recommends a dedicated pump and hydraulic circuit)
*Allow for adequate ventilation
Files for RC40 Bid Specifications
Warranty
This product was added to our catalog on Friday 22 January, 2010.
